Standards

Printer-friendly versionPrinter-friendly version
Standards are specifications for products and services. Usually they are voluntary, but they can always be referred to in deciding whether something is or was safe.

In 2005 UK adopted European General Product Safety Regulations (GPSR). These regulations forbid the marketing of unsafe products, whilst presuming the safety of any product that conforms to an appropriate published standard, especially if it's a European Standard. GPSR allows a few other ways of establishing that a product is safe, but Standards are preferred. 

Some products fall outside the scope of any published standard, but even then the closest similar standard may be referred to in deciding whether it was safe.

CTC holds copies of all the BS-EN standards listed below, but please do not ask us to copy and send you them in whole or part, since to do so contravenes a strictly enforced copyright. Copies may be obtained from BSI.

Standards for Bikes

Thanks to the Pedal Bicycles Safety Regulations it's been illegal to sell a new bike that didn't conform to BS6102 part 1 since 1983. At about the same time as GPSR came in, that old standard was superseded by a raft of European Standards developed from it, but with a lot of extra tests and requirements that differed according to the type of bicycle. These new standards are as follows:

  • BSEN14764 – City and trekking bicycles (i.e. most normal bikes)
  • BSEN14765 – Bicycles for young children
  • BSEN14766 – Mountain-bicycles
  • BSEN14781 – Racing bicycles
  • BSEN15194 – Electrically power assisted cycles

Lighting Standards

Other parts (two and three) of BS6102 live on, since they deal with reflectors (BS6102/2) and lights (BS6102/3) and are called up by the Road Vehicles Lighting Regulations. Conforming with one of those standards ensures that a reflector or lamp is approved, which means it can be the one item of that type you are required to have in the dark. But it's not the only way to gain approval and non-approved lamps can always be used in addition to the approved ones, for extra conspicuity, so shops must be free to sell them. Unfortunately that is sometimes all they have for sale, approved lamps can be hard to find, but that's another story.

Helmet Standards

Helmets for cycling are one thing where Trading Standards Officers have been keen to root out any dubious products, even though there is no law specifically prohibiting the sale of helmets that don't conform to any standard. So you can be sure that any cycling helmet in the shops will at least claim to meet a reputable standard, probably BSEN1078. The "EN" bit signifies a European standard (or "Norm") adopted by BS. But if you can find any helmets with a Snell Foundation B90 (or higher) sticker in them, that's a substantially stronger standard.

Other Equipment

CTC has taken an active part in writing BSEN13444 – Bicycle child seats, and BSEN14872 – Luggage carriers.

CTC Standard for Hired & Used Cycles

Since BS6102/1 can be applies only to brand-new, unused bicycles, there has long been a desire for some yardstick against which to asses the safety and roadworthiness of a bicycle that's already seen a bit of wear and tear. This desire for a kind of cycling MOT became a necessity in conjunction with the CTC Cycle Hire Code, so CTC answered it with a specification, broadly based upon BS6102/1.

Chris Juden – 2010-06-25

PreviewAttachmentSize
From the archives: CTC Hire Standards from 199956.25 KB

Share this article

Archive

  • Patron: Her Majesty The Queen
  • President: Jon Snow
  • Chief Executive: Gordon Seabright
  • Cyclists' Touring Club (CTC): A company limited by guarantee, registered in England no.25185. Registered as a charity in England and Wales No 1147607 and in Scotland No SC042541
  • CTC Charitable Trust: A company limited by guarantee, registered in England no.5125969. Registered as a charity in England and Wales No 1104324 and Scotland No SC038626

 

Terms and Conditions